As a lover of blue, Marian couldn’t resist adding this new hue to the line. Aviary, a smokey blue gray, was inspired by and named after an antique birdcage Marian purchased a few years ago. It was the color that captured her attention, so she mixed a perfect batch in milk paint to round out our collection of 25 colors.
One quart of milk paint covers approximately 70 sq. feet. Simply mix this powder with water- it’s that easy! A Milk Paint finish is unique and can range from a solid color to a stain, it all depends on how much water you add! It can be used on any porous surface without a primer. It will never chip or peel on porous surfaces as it soaks in and binds with the substrate.
Mixing: Mix approximately 1 part water to 1 part milk paint powder with a blender (strictly used for paint), by shaking in a lidded container, by hand with a whisk or stir stick or with a motorized paint mixer. Add tepid water to container first, then add milk paint powder slowly and mix for 3-5 minutes. Paint a test swatch to make sure desired consistency has been achieved. If the paint is translucent or runny, it is too thin. If it the brush drags and the paint appears gritty or chunky, it is too thick. Add more water or powder accordingly and mix again. Once satisfied with the color opacity and consistency, pour out paint into a wide mouth container. Apply paint evenly in long, smooth strokes with a brush or roller. Stir paint occasionally as pigments may settle at the bottom of the container. Drying time is approximately 30 minutes. Two to three coats may be necessary to achieve your desired coverage and possibly more when applying a light color over a dark surface. Lightly sand with a 220 grit sandpaper to smooth surface. Remove dust. A top coat is required to protect the paint and bring out the richness and depth of the color. We recommend MMS Hemp Oil for a 100% natural finish or MMS Furniture Wax for a hand-rubbed appearance. A polyurethane or varnish of your choosing may also be applied.